Lumii Black Electronic Dimmable Ballast 600w
A Digital, Dimmable 600w Ballast with Quality Components!
Contains
1 x LUMii Digital Dimmable 600w Ballast with moulded IEC connection
1 x 2 metre lead with moulded UK plug
Voltage:
220V - 240V
How the LUMii Black Works:
The LUMii Black digital ballast converts mains electricity to the correct voltage and current to start-up and power a 250, 400, 600w HPS or MH lamps. By using the boost feature, you can achieve 660 watts of power, further pushing your plants to their full potential. It produces more lumen output, use less electricity and does not degrade with age like core and coil type magnetic ballasts, which become noisy, use more electricity and produce less lumens as they age. The LUMii Black features both soft start, which regulates the power flow to your lamp at a steady rate and thermal protection, which protects your lamp and ballast in the event of a power spike or drop in energy supply.
How to Use the LUMii 600w Digital Ballast:
Although this ballast runs fairly cool in use, it should still be located on a flat, firm, surface (not carpet) and in a well-ventilated location. It should never be covered and there should be no combustible items in the vicinity just in case. Connect the input lead of your reflector to the output lead of the ballast ensuring the cable is not pulled tight and does not come into contact with anything hot (e.g. lamp, reflector, ballast). Ensure your lamp is tightly screwed into the bulb-holder and that your reflector is at the correct height.
Use the power-output switch to select the desired output wattage. 250-watt lamps can only be used at 250 watts. 400-watt lamps can be used at 400 watts or turned down to 250 watts. 600-watt lamps can be used at 600 watts or turned down to 400 watts or 250 watts. The LUMii 600w ballast can be used on the “overdrive" setting which increases the output by 10%, increasing the light produced by the lamp. Once the correct output wattage has been selected, connect the mains plug into an electrical outlet socket and switch on. The ballast will start-up and light the lamp
A Digital, Dimmable 600w Ballast with Quality Components!
Contains
1 x LUMii Digital Dimmable 600w Ballast with moulded IEC connection
1 x 2 metre lead with moulded UK plug
Voltage:
220V - 240V
How the LUMii Black Works:
The LUMii Black digital ballast converts mains electricity to the correct voltage and current to start-up and power a 250, 400, 600w HPS or MH lamps. By using the boost feature, you can achieve 660 watts of power, further pushing your plants to their full potential. It produces more lumen output, use less electricity and does not degrade with age like core and coil type magnetic ballasts, which become noisy, use more electricity and produce less lumens as they age. The LUMii Black features both soft start, which regulates the power flow to your lamp at a steady rate and thermal protection, which protects your lamp and ballast in the event of a power spike or drop in energy supply.
How to Use the LUMii 600w Digital Ballast:
Although this ballast runs fairly cool in use, it should still be located on a flat, firm, surface (not carpet) and in a well-ventilated location. It should never be covered and there should be no combustible items in the vicinity just in case. Connect the input lead of your reflector to the output lead of the ballast ensuring the cable is not pulled tight and does not come into contact with anything hot (e.g. lamp, reflector, ballast). Ensure your lamp is tightly screwed into the bulb-holder and that your reflector is at the correct height.
Use the power-output switch to select the desired output wattage. 250-watt lamps can only be used at 250 watts. 400-watt lamps can be used at 400 watts or turned down to 250 watts. 600-watt lamps can be used at 600 watts or turned down to 400 watts or 250 watts. The LUMii 600w ballast can be used on the “overdrive" setting which increases the output by 10%, increasing the light produced by the lamp. Once the correct output wattage has been selected, connect the mains plug into an electrical outlet socket and switch on. The ballast will start-up and light the lamp